| INDEX |
NAME |
DIRECTION |
DEFAULT |
UNIT |
INFO |
|---|
| 0 |
I.CurrentState |
INPUT |
0 |
on/off |
Current state of the light.enum[0=off,1=on] |
| 1 |
I.DimLevel |
INPUT |
50 |
% |
Current dim level of the light. float[0.00,100.0] |
| 2 |
I.RGBColor |
INPUT |
0 |
RGB |
Current RGB color of the RGB light. int[24bit->R:23-16|G:15-8|B:7-0] |
| 3 |
I.TunableWhiteLevel |
INPUT |
0 |
% |
Current white level of the tunable white light. float[0.00,100.0] |
| 4 |
I.Elementinfo |
INPUT |
0 |
ok/manualOff/manualOn/locked/alarm |
Information about the light element status inside myGEKKO OS. It shows the sumstate of the manual selection mode and alarms/locking state. enum[0=ok,1=manualOff,2=manualOn,3=locked,4=alarm] |
| 5 |
I.EnrollState |
INPUT |
0 |
notUsed/enrolled/enrolling/enrollError/notReachable |
Pair state of the YARA light with myGEKKO OS. enum[0=notUsed,1=enrolled,2=enrolling,3=enrollError,4=notReachable] |
| 6 |
I.EnergyConsumed1hValue |
INPUT |
0 |
kWh |
Energy consumed in the last hour. int[0,255] |
| 7 |
I.CurrentPowerConsumptionValue |
INPUT |
0 |
W |
Instantaneous current power consumption. int[0,65535] |
| 8 |
I.OccupancyTimerCenterValue |
INPUT |
0 |
s |
Remaining time to zero to set the occupancy staus of the center place to NOT OCCUPIED. int[0,7200] |
| 9 |
I.OccupancyTimerLeftValue |
INPUT |
0 |
s |
Remaining time to zero to set the occupancy staus of the left place to NOT OCCUPIED. int[0,7200] |
| 10 |
I.OccupancyTimerRightValue |
INPUT |
0 |
s |
Remaining time to zero to set the occupancy staus of the right place to NOT OCCUPIED. int[0,7200] |
| 11 |
I.VOCValue |
INPUT |
0 |
ppb |
Current Volatile Organic Compounds (VOCs) value measured by the air quality sensor on the lamp in parts per billion (ppb). int[0,65535] |
| 12 |
I.RelativeHumidityLevel |
INPUT |
40 |
% |
Current relative humidity level measured by humidity sensor on the lamp. float[0.00,100.0] |
| 13 |
I.TemperatureValue |
INPUT |
20 |
°C |
Current temperature value measured by the lamp in degrees Celsius. float[-100.00,100.00] |
| 14 |
I.BrightnessValue |
INPUT |
0 |
Lux |
Current brightness value measured by the light sensor on the lamp. float[0.00,65535.00] |
| 15 |
I.LoudnessValue |
INPUT |
0 |
dB |
Current environmental noise measured by the sound sensor on the lamp in decibels (dB). float[-255.00,255.00] |
| 16 |
I.KeepAliveValue |
INPUT |
0 |
|
Current value of the internal timestamp register. It is a 32-bit register: half is a status register, half is the timer to add a timestamp to the sampled values. int[0,4294967296] |
| 17 |
I.OccupancyLEDColorLeftState |
INPUT |
0 |
off/red/green/blue |
Current color of the occupancy left LED. Green means "free", red means "occupied", and blue means "reserved". char[0=off,R=red,G=green,B=blue] |
| 18 |
I.OccupancyLEDColorRightState |
INPUT |
0 |
off/red/green/blue |
Current color of the occupancy right LED. Green means "free", red means "occupied", and blue means "reserved". char[0=off,R=red,G=green,B=blue] |
| 19 |
O.RequestGlobalStatus |
OUTPUT |
0 |
UPDATE |
|
| 20 |
O.RequestDiscovery |
OUTPUT |
0 |
DISCOVERY |
|
| 21 |
O.SetCurrentState |
OUTPUT |
0 |
off/on |
Change the current state of the light. enum[0=off,1=on] |
| 22 |
O.SetDim.Level |
OUTPUT |
0 |
% |
Modify the current dim level of the light. float[0.00,100.00] |
| 23 |
O.ToggleCurrentState |
OUTPUT |
0 |
toggle |
Toggle the current state of the light. enum[1=toggle] |
| 24 |
O.SetRGBColor |
OUTPUT |
0 |
RGB |
Modify the current RGB color of the RGB light. int[24bit->R:23-16|G:15-8|B:7-0] |
| 25 |
O.SetTunableWhiteLevel |
OUTPUT |
0 |
% |
Modify the current white level of the tunable white light. float[0.00,100.00] |
| 26 |
O.SetWorkingMode |
OUTPUT |
0 |
off/on/auto/manual |
Change the wroking mode of the YARA light. enum[0=off,1=on,2=auto,3=manual] |
| 27 |
O.SetOccupancyLEDCenterColor |
OUTPUT |
0 |
off/red/green/blue |
Modify the current color of the occupancy center LED. Green menas "free", red means "occupied", and blue means "reserved". enum[0=off,1=red,2=green,3=blue] |
| 28 |
O.SetOccupancyLEDRightColor |
OUTPUT |
0 |
off/red/green/blue |
Modify the current color of the occupancy left LED. Green menas "free", red means "occupied", and blue means "reserved". enum[0=off,1=red,2=green,3=blue] |
| 29 |
O.SetOccupancyLEDLeftColor |
OUTPUT |
0 |
off/red/green/blue |
Modify the current color of the occupancy left LED. Green menas "free", red means "occupied", and blue means "reserved". enum[0=off,1=red,2=green,3=blue] |
| 30 |
O.SetTemperatureValueLEDState |
OUTPUT |
0 |
off/on |
Change the state of the LED associated to the temperature threshold value. enum[0=off,1=on] |
| 31 |
O.SetVOCValueLEDState |
OUTPUT |
0 |
off/on |
Change the state of the LED associated to the VOC threshold value. enum[0=off,1=on] |
| 32 |
O.SetLoudnessValueLEDState |
OUTPUT |
0 |
off/on |
Change the state of the LED associated to the loudness threshold value. enum[0=off,1=on] |
| 33 |
O.SetGenericLEDState |
OUTPUT |
0 |
off/on |
enum[0=off,1=on] |
| 34 |
O.SetStatusLEDState |
OUTPUT |
0 |
off/on |
Change the state of the entire device (not just the light). enum[0=off,1=on] |
| 35 |
O.GetLightControlStateValue |
OUTPUT |
0 |
reqeust |
Get the value of the status register (this register is read-only). 64-bit integer status register. enum[1=request] |
| 36 |
O.SetInternalTime |
OUTPUT |
0 |
|
Change the internal time or clock, using unix time as reference. int[0,4294967295] |
| 37 |
O.ResetLight |
OUTPUT |
0 |
restart/factoryReset/reloadLightConfiguration/reloadPipeConfiguration |
Reset the light at different levels. enum[0=restart,1=factoryReset,2=reloadLightConfiguration,3=reloadPipeConfiguration] |
| 38 |
O.SetTriggerWorkingMode |
OUTPUT |
0 |
fast/reduce/service/presence/externPresence/manualOn/autoOff/reload/serviceOff |
enum[0=fast,1=reduce,2=service,3=presence,4=externPresence,5=manualOn,6=autoOff,7=reload,8=serviceOff] |
| 39 |
O.SetTriggerType |
OUTPUT |
0 |
switchOff/switchOn/switchOffAuto |
enum[0=switchOff,1=switchOn,2=switchOffAuto] |